Description
Specifications
- Critical Service
- Corrosive, General Service
- Flow Characteristics
- Equal percentage
- Material
- 316 Stainless Steel, 304 Stainless Steel, Stainless Steel
- Operating Temperature
- High Temperature, High Temperature (>250F)
- Pressure Class
- ASME
- Shutoff Class
- Class II (FCI 70-2), Class IV (FCI 70-2)
- Valve Size
- NPS 1 / DN 25, NPS 1-1/2 / DN 40, NPS 12 / DN 300, NPS 14 / DN 350, NPS 16 / DN 400, NPS 18 / DN 450, NPS 2 / DN 50, NPS 3 / DN 80, NPS 4 / DN 100, NPS 6 / DN 150, NPS 8 / DN 200, NPS 20 / DN 500
- Valve Size Standard
- NPS, DN
- Valve Type
- Trunnion Ball Valve, Ball Valve, Ball, Automated Ball Valve
- Certifications
- PED, Lloyd’s Register, CE
- End Connection
- Flanged
Features
- Rotary-valve design provides shearing action between the V-notch ball and the seat, promoting a smooth, non-clogging operation.
- Straight-through flow design provides high capacity for fluids.
- With a single-seat design, torque is lower than typical trunnion design valves, for ease of operation and reduced actuator cost.
- Two seat designs:<ul><li>Laminated seat provides ASME/FCI 70-2 class IV shut-off and withstands tough operating conditions.</li><li>Thick (solid) seat for high-velocity and abrasive or erosive service.</li></ul>
- Segmented, V-notched ball features high rangeability and smooth throttling action.
- Choice of full and reduced port, providing the right flow capacity for every application at low cost.
- Machined ISO 5211 top mounting flange (VA series only).
- Heavy-duty, stainless steel shaft for high strength and rigidity.
- Multiple, adjustable ring packing allows easy adjustment without valve disassembly or actuator removal.
- Shaft bearings assure a durability, smooth and easy valve operation.
- Positive alignment of split body.
- The spline connection minimizes the backlash of shaft and disk. It results excellent control performance.
